ssh and upmpcli problem
I have a problem with my openwrt configuration.
First problem: I can't reach my widora neo through ssh when connected with the lan port to my router. I changed the network configuration for the lan port to dhcp so it receives a IP from my router, but I can't ssh into it.
Second problem: I want to reach upmpcli through my home wifi. So when the widora neo is plugged in the home router through ethernet, But upmpcli is not broadcasted through my home router. I tried different interfaces in the upmpcli config, but only the original setting of br-lan works and broadcast through the widora wifi.
In my finished project I don't need the wifi, only the lan. So I want to disable the wifi. But somewhere it seems connection through lan is blocked as upmpcli and dropbear aren't reachable through the lan port.
By the way, any change on a openwrt trunk version, so squeezelite is also available thought the openwrt repo?
Looks like a firewall issue, but I have to look at your /etc/config/network file.
This is my current /etc/config/network:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdd7:5048:aea1::/48'
config interface 'wan'
option ifname 'eth0'
option macaddr '0c:ef:af:d0:13:4b'
option proto 'dhcp'
option ip6assign '60'
I already tried different version without succes. I disabled also the firewall:
What I want to achieve is that the widora works as a client on the system so not as a router, but in fact as a regular pc. I want to reach it over the network through ssh and it should work with upmpcli as a pnp renderer and with squeezelite as a squeezebox client connected to my amplifier (old Kenwood KR5400).