So a BIT5 can be put in a mpcie slot and serves as a PC in a PC? How does it communicate with the PC, just as a wireless device or can it share storage to?
Latest posts made by roel
RE: ssh and upmpcli problem
This is my current /etc/config/network:
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdd7:5048:aea1::/48'
config interface 'wan'
option ifname 'eth0'
option macaddr '0c:ef:af:d0:13:4b'
option proto 'dhcp'
option ip6assign '60'
I already tried different version without succes. I disabled also the firewall:
What I want to achieve is that the widora works as a client on the system so not as a router, but in fact as a regular pc. I want to reach it over the network through ssh and it should work with upmpcli as a pnp renderer and with squeezelite as a squeezebox client connected to my amplifier (old Kenwood KR5400).
ssh and upmpcli problem
I have a problem with my openwrt configuration.
First problem: I can't reach my widora neo through ssh when connected with the lan port to my router. I changed the network configuration for the lan port to dhcp so it receives a IP from my router, but I can't ssh into it.
Second problem: I want to reach upmpcli through my home wifi. So when the widora neo is plugged in the home router through ethernet, But upmpcli is not broadcasted through my home router. I tried different interfaces in the upmpcli config, but only the original setting of br-lan works and broadcast through the widora wifi.
In my finished project I don't need the wifi, only the lan. So I want to disable the wifi. But somewhere it seems connection through lan is blocked as upmpcli and dropbear aren't reachable through the lan port.
By the way, any change on a openwrt trunk version, so squeezelite is also available thought the openwrt repo?
RE: can't ssh into neo
I managed to get in the NEO again and did a 'firstboot' to reset everything. First thin i noticed is that the IP is now 192.168.1.1 it was 192.168.99.1 before the firstboot. Now everything works without problem. The widora_mode command works without error message. I checked /etc/config/wireless and this is now a compleet different configuration with indeed radio0 as wifi-device. Something strange happened here.
RE: can't ssh into neo
BTW I already tried the widora_mode repeater ssid key, but I got a error that MT7628 doesn't exist (or something like that).
How do you use that command? Do you have to replace ssid with the ssid to connect to and key with the password? Don't you have to define the device, for example
widora_mode repeater radio ssid home key 1234578
widora mode repeater home 1234578
or is the command interactive and does it ask which ssid and pasword.
I already tried the command in a few variations but only get the error about the missing mt7628 device.
Thanks for the support, I appreciate your work.
can't ssh into neo
Hello, I'm new here.
I upgraded a few days ago to firmware 0.1.7. I couldn't get wifi to work. I don't know why, but while trying I did something wrong and I can't ssh to the NEO anymore, I don't get an IP also. When I connect the NEO to my router it gets an IP, when i browse tot the IP I come to a site with unknow symbols so I can't read it. Is there a way to reset the NEO by hardware? Pushing the rest button only reboots the device.